Data Cable Products
|
| Slim-line SATA Cable - 8" |
 |
| This cable is used on slim-line SATA DVD and Blu-ray drives.
One end has a special connector to fit the drive, the other end has
a standard SATA connector and 5 volt 4-pin Molex connector. 8"
long. $10.00
|
|
| Slim-line SATA Cable - 12" |
 |
| This cable is used on slim-line SATA DVD and Blu-ray drives.
One end has a special connector to fit the drive, the other end has
a standard SATA connector and 5 volt 4-pin Molex connector. 12"
long. $11.00
|
|
| Slim-line SATA Cable - 18" |
 |
| This cable is used on slim-line SATA DVD and Blu-ray drives.
One end has a special connector to fit the drive, the other end has
a standard SATA connector and 5 volt 4-pin Molex connector. 18"
long. $12.00
|
|
| Slim-line Drive SATA/Power Adapter |
 |
| This adapter allows a Serial ATA data cable
to connect from the motherboard to a slim-line ATAPI optical drive. The back
of the adapter also has a connector for a floppy power cable and CD-out.
Includes mounting screws. Note: Adapter is not for use with
SATA drives, use the Slim-line SATA cables above. For use with older
ATAPI style drives only. $25.00
|
|
| Slim-line Drive IDE/Power Adapter |
 |
| This adapter allows a standard 40-pin IDE data cable
to connect from the motherboard to a slim-line ATAPI DVD drive. The back
of the adapter also has a connector for a floppy power cable and CD-out.
Includes mounting screws. $12.00
|
|
| USB to MB Header Adapter |
 |
| This adapter allows you to connect internal USB
devices (VFD, IR, PowerMate, Touch-Screen) directly to a USB header
on the motherboard. Eliminates the need to route these cables
externally. Each adapter has two ports. |
|
$15.00 each |
|
| NEW!
USB 3.0 and eSATA RAID adapter |
USB 3.0 and eSATA RAID adapter |
This new RAID adapter has both high speed USB 3.0 and
eSATA interface for versatility. Features an integrated hardware
RAID controller to maximize performance. The RAID configuration is
programmed using onboard jumpers for simple deployment. Software is
included for RAID management and advanced RAID configuration.
- USB 3.0 host port
- eSATA host port
- (5) SATA ports
- RAID0 (Striping)
- RAID5 (Parity)
- RAID10 (Mirrored Striped)
- JBOD (Concatenation)
$115 each
|
|
| eSATA RAID adapter |
eSATA RAID adapter |
The eSATA RAID adapter features an integrated hardware
RAID controller to maximize performance. The RAID configuration is
programmed using onboard jumpers for simple deployment. Software is
included for RAID management and advanced RAID configuration.
- RAID0 (Striping)
- RAID5 (Parity)
- RAID10 (Mirrored Striped)
- JBOD (Concatenation)
$95 each
|
|
| eSATA cable |
 |
| External eSATA cable used to connect the eSATA adapter
above to the eSATA port on the host PC.
One meter eSATA cable - $14
Two meter eSATA cable - $21
|
|
| Single SAS to SATA Centronics adapter |
 |
SAS SFF-8088 adapter with four SATA HDD connectors on
a Centronics type slot bracket. Use this adapter in our storage
cases for connecting to four SATA HDD's. One Mini-SAS cable is
required for connecting to a 4-port RAID card with an external back
panel SFF-8088 connector.
- Eight 7-pin Serial ATA2 Connectors
- One SFF-8088 External SAS Connectors
$52.50 each
|
|
| Dual SAS to SATA Centronics adapter |
 |
SAS adapter with eight SATA HDD connectors on a
Centronics type slot bracket. Use this adapter in our storage cases
for connecting to eight SATA HDD's. Two Mini-SAS cables are required
for connecting to a 8-port RAID card with two external back panel
SFF-8088 connectors
- Eight 7-pin Serial ATA2 Connectors
- Two SFF-8088 External SAS Connectors
$106.95 each
|
|
| Mini-SAS SFF-8088 Cable |
 |
| Mini-SAS cable is used to connect our storage cases to
your host PC. Each end has a SFF-8088 connector. Use for connecting
RAID card to the SFF-8088 SATA adapter above. Choose from 1-meter or
2-meter, we also have 4-meter and 8-meter cables available special
order. |
| One (1) meter long $56 |
| Two (2) meter long $82 |
|
| Multi-Lane to SATA PCI adapter |
 |
Infiniband Multilane SFF-8470 adapter with four SATA
HDD connectors on a PCI slot bracket. Use this adapter on your host PC case
and connect to your storage case using an
external Multi-Lane cable. Connect the four internal SATA
connections to either your motherboard or SATA RAID card.
- Four 7-pin Serial ATA2 Connectors
- One Infiniband Multilane SFF-8470 Connector
- 3Gb/s SATA2 Data Transfer Rate
- Built-in cross-over for straight through cable
$39.95 each
|
|
| Multi-Lane to SATA Centronics adapter |
 |
Infiniband Multilane SFF-8470 adapter with four SATA drive connectors on
custom Centronics type slot bracket. Use this adapter in our storage
cases when using an external Multi-Lane cable. Connect four
internal SATA HDD's.
- Four 7-pin Serial ATA2 Connectors
- One Infiniband Multilane SFF-8470 Connector
- 3Gb/s SATA2 Data Transfer Rate
$39.95 each
|
|
| Multi-Lane SFF-8470 Cable |
 |
| Multi-Lane cable is used to connect our storage cases
to your host PC. Each end has a SFF-8470 thumb-screw connector to fit the
SFF-8470 SATA port
adapters above. Cable is wired straight-through. Choose from 1-meter
or 2-meter, we also have 3-meter and 5-meter cables available
special order. |
| One (1) meter long $51 |
| Two (2) meter long $80 |
|
| Ultra-Slim IDE Data Cable for DVD drive |
 |
This ultra-slim cable is very compact and
easy to bend and route though the case. Use this longer cable to
connect the door mounted DVD drive to the motherboard.
- Ultra-Slim to save space and promote airflow
- Extra flexible for easy bending & twisting
- 23" length single device cable
- Ultra DMA (ATA 133/100)
- High quality cable and connectors
- Black nylon mesh sleeve
|
|
$18.00
|
|
| Serial ATA Data Cable |
 |
|
Serial ATA data cable with
straight connectors at each end. The 12" long cable is included with the
Mass Storage 4X Case to connect each
drive to the rear panel port.
|
|
| 20" Right-Angle Serial ATA Cable |
 |
| Serial ATA data cable with a straight connector on one
end and right angle connector on the other. Overall length is 20".
$4.00 each
|
|
