HTPC Systems

  

  

  

  

  

 Set Top PC's

  

  

  

 NAS Systems

  

  

 Storage Systems

  

  

  

 Gaming Systems

  

 Accesories

  

  

     

  

  

  

  

  

  

  

  

  

 Cooling

  

  

  

  

 Power

  

  

  

 HDTV Reception

  

  

  

  

  

  

 General Info

  

  

  

 Shopping Cart

  

Antenna Phasing Harnesses and Signal Combiners

Matched Length Antenna Phasing Harness
  • Coax cable assemblies are precision cut to exact matched lengths for proper phasing of stacked antenna arrays
  • Termination options include environmentally sealed Snap-N-Seal® connectors on each end or one end prepped for direct connection to Blake PCB baluns
  • 95% Tinned Copper Braid for secure connection with PCB balun mounting clamps

  • Constructed using extra-low loss RG-6/U Precision Analog/Digital Video Cable
  • 5.00 dB attenuation per 100' at 750 MHz
  • 18 AWG Bare Copper Conductor
  • Foam PE - Gas Injected Foam High Density Polyethylene insulation
  • Dual Shield -  100% Foil - 95% Tinned Copper Braid
  • PVC - Polyvinyl Chloride jacket (black)
  • Structural Return Loss: 5 MHz - 3 GHz, 21-23 dB min.
  • Belden 1694A Specifications

Phasing Harnesses

PH-30

One pair of matched cable assemblies with Snap-N-Seal® connectors on each end. Short 36" length is for use with CS-002 splitter located between the antennas.

$30

PH-30B

One pair of matched cable assemblies with a Snap-N-Seal® connector on one end and other end prepped for direct connection to Blake PCB balun. Short 36" length is for use with CS-002 splitter located between the antennas.

$30

PH-72

One pair of matched cable assemblies with Snap-N-Seal® connectors on each end. Long 72" length. For CM-4248 antennas, use CS-538 mast mounted combiner.

$35

PH-72B

One pair of matched cable assemblies with a Snap-N-Seal® connector on one end and other end prepped for direct connection to Blake PCB balun. Long 72" length for use with CS-538 mast mounted combiner.

$35

PH-72C

One pair of matched cable assemblies with both ends prepped for direct connection to Blake PCB balun/Labgear combiner. Long 72" length for use with CS-011 mast mounted combiner.

$35

Signal Combiners

Winegard_SP-1002_ Splitter.jpg (55521 bytes)
CS-002

Winegard #SP-1002 5-1000MHz Splitter

Use this inline mounted combiner with the short 30" harnesses

PH-30 for Channel Master antennas and PH-30B for Blake antennas.

$8 N/A

Channel Master_0538_Antenna_Joiner.jpg (55099 bytes)
CS-538

Channel Master  #0538 Antenna Joiner/2-Way Splitter

Use this mast mounted combiner with the long 72" harnesses

PH-72 for Channel Master antennas and PH-72B for Blake antennas.

$12 N/A

Labgear_601100_ combiner.jpg (59965 bytes)
CS-011

Labgear #6011/00 Low-loss UHF combiner/splitter

Use this mast mounted combiner with the long 72" harnesses

PH-72C for Blake antennas.

$17 N/A

 

  


Copyright © 2001-2013  A-Tech Fabrication Company.  All rights reserved.