Power Supply Products
|
| External Power Supply Adapter Kit |
 |
| This kit adapts a ATX power supply opening to house a
DC-DC converter. A 80mm fan opening provides cooling. Includes
mounting plate for a PW-200-V DC-DC converter, 80mm fan grill, power
connector cut-out, pressed-in steel inserts, and all mounting
screws. Designed to fit the Mass
Storage 8X Case, but will fit into any ATX PS opening. $45.00 each
|
|
| 200 Watt DC-DC Power Converter |
 |
| Internal DC-DC power converter provides power to the
system. Plugs directly into a 20-pin ATX MB connector. To operate, an external AC power adapter is required,
see below.
Note: This power converter is not used in our cases. See
the 6-pin version below to use in our cases.
- 12 volts input
- 200 watts output
- 12A @ 12V
- 6A @ 3.3V
- 6A @ 5V
$49.95 each
|
|
| 200 Watt 6-pin DC-DC Power Converter |
|
| Internal DC-DC power converter provides power to the
system. Plugs directly into a 20-pin ATX MB connector. To operate, an external AC power adapter is required,
see below. Use this power converter in our
Mini-Server 5X case or with the External Power Supply Adapter Kit
above in the Mass Storage 8X Case. Note: Power input cable is modified for a 6-pin connector
to use with our heavy-duty AC power adapter below.
- 12 volts input
- 200 watts output
- 12A @ 12V
- 6A @ 3.3V
- 6A @ 5V
$54.95 each
|
|
| 120 Watt 6-pin DC-DC Power Supply |
120 Watt 6-pin DC-DC Power Supply
|
| The picoPSU-120 is the smallest snap-in 12V ATX dc-dc
power supply. Plugs directly into a 20-pin ATX MB connector. 120 watts
maximum output. 95% efficiency. To operate, an external AC power adapter is required,
see below.
Use this power supply with the
Mini-Client 2500 case. Note: Power input cable is modified for a 6-pin connector
to use with our heavy-duty AC power adapter below.
- 12 volts input
- 6-pin power input connector
- 120 watts output
- 7A @ 12V
- 6A @ 3.3V
- 6A @ 5V
$54.95 each
|
|
| 120 Watt DC-DC Power Supply |
120 Watt DC-DC Power Supply |
The picoPSU-120 is the smallest snap-in 12V ATX dc-dc
power supply. Plugs directly into a 20-pin ATX MB connector. 120 watts
maximum output. 95% efficiency. To operate, an external AC power adapter is required,
see below. Use this power supply in the
Mass Storage MS4x Case and
Mass Storage NAS4x Case.
- 12 volts input
- 120 watts output
- 7A @ 12V
- 6A @ 3.3V
- 6A @ 5V
- 5mm x 2.5mm connector
$49.95 each
|
|
| 12 Volt AC Power Adapter |
 |
High Performance AC power adapter. Totally fanless
with no overload fan or vent slots, completely sealed housing. High
efficiency design allows adapter to remain cool under load. 15 Amp
peak load rating starts up power hungry hard drives. Use this AC
power adapter with the Mini-Client
2500, Mini-Server 5X , and
Mass Storage 8X.
- 90 to 264 VAC input
- 12 Volts Output
- 120 Watts (rated)
- 9 Amps Continuous, 15 Amp Peak
- 6-pin Connector
$95.00 each
|
|
| 12 Volt AC Power Adapter |
12 Volt AC Power Adapter |
External AC power adapter for use with the NAS4x case.
Use this AC power adapter with the Mass Storage
MS4x Case and Mass Storage NAS4x Case.
- 100 to 240 VAC input
- 12 Volts Output
- 8.5 Amps
- 5mm x 2.5mm Connector
$39.00 each
|
|
| 2U External Power Supply Block-off Plate |
 |
| This block-off plate fits the 2U power supply opening on the
rear panel of the 3000 case. It will allow you to run a external
low-voltage power supply
similar to a notebook computer. The plate features steel threaded
inserts and a power socket cut-out. Designed for the
iTuner power supply PW-200-M, PW-200-V, and picoPSU-120 which can be
purchased from Mini-Box.com.
These power supplies are intended for lower power systems like a
Intel Mobile CPU or VIA ITX MB. This plate only fits the
Heatsink 3000 Case. $15.00
|
|
